How to deal with belt slippage of vertical packaging machine
Vertical packaging machines are widely used. The film-drawing device is one of the important parts of the vertical packaging machine. The function of the film-drawing belt is to pull the packaging machine. When using the vertical packaging machine, the film-drawing belt will inevitably appear. If the film belt of the vertical packaging machine slips, how should we deal with it?
Faced with the common problem of film belt slipping in vertical packaging machines, we can adopt the following three sophisticated and efficient strategies to easily deal with it and ensure the smoothness and efficiency of the packaging process:
1.Deep cleaning to restore belt friction
When the film belt accumulates dust, tiny particles or impurities in the air due to long-term operation, resulting in reduced surface friction and slipping, the first task is to carry out thorough cleaning. The specific operations are as follows:
①First, stop the machine safely and disconnect the power supply to ensure a safe operating environment. Then, gently remove the stretch film belt from the device to avoid overstretching or damage.
②use a soft rag with an appropriate amount of alcohol and wipe it carefully along the running direction of the belt to ensure that all “contaminants” attached to the surface of the belt are removed.
This process not only restores the cleanliness of the belt, but also effectively increases its surface friction, thereby reducing the possibility of slipping.
2. Enhance friction and optimize contact surface design
If the problem persists after cleaning, it is most likely due to insufficient friction on the contact surface between the film belt and the former cylinder. To solve this problem, we can take measures to add high-temperature tape to the outer contact surface of the former cylinder. This high-temperature tape has excellent wear resistance, high temperature resistance and high viscosity, which can significantly increase the friction between the belt and the cylinder and effectively prevent slipping. During the application process, it is necessary to ensure that the tape is smooth without wrinkles and closely adheres to the surface of the cylinder to achieve the best effect.
3. Quality upgrade, choose high-quality film belts
if the above two steps fail to completely solve the problem, it may be caused by the quality problem of the film belt itself. At this time, replacing a high-quality stretch film belt becomes a necessary choice. When purchasing a new belt, you should give priority to those products that are made of high-quality materials and have excellent wear resistance, aging resistance and high stability. At the same time, different brands and models of stretch film belts may have differences in performance. Therefore, it is recommended to choose the belt that is most suitable for your equipment based on the actual needs of the equipment and past use experience. Through this measure, it can not only fundamentally solve the slipping problem, but also improve the overall operating efficiency and stability of the packaging machine.
To sum up, through the three strategies of deep cleaning, friction enhancement and quality upgrading, we can easily deal with the slipping problem of the vertical packaging machine’s film belt and ensure the smooth progress of the packaging operation.
Soonkpack has specialized in manufacturing packaging machinery and equipment for 16 years and has more than 24 years of industry experience in the industry. If you need to configure packaging machinery and equipment for your factory, you can contact us to obtain packaging solutions.
You may be interested in:
fully automatic packaging machine line
Automatic Ice Packaging Machine
